Filters

Orenco Bio-Tube

Orenco® Biotube® FT-Series Residential Effluent Filters remove about two-thirds of suspended solids from effluent, helping extend drainfield life. They are used in new or existing tanks, for residential and light commercial use. Biotube FT-Series Residential Effluent Filters install on the Schedule 40 or Type 3034 outlet pipe in the septic tank. They come with a filter cartridge, PVC housing, and an extendable PVC handle.

Polylok PL122

The PL-122 was the original Polylok filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. Ideal for residential waste flows up to 3,000 gallons per day (GPD).

Polylok PL68

The PL-68 is much more than just an effluent filter. The housing can also be used as an inlet baffle (tee) or, with any 4' outlet septic tank filter. The housing is designed to accept Polylok's snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank. The PL-68 is ideal for residential waste flows up to 800 GPD.

Zabel A100

The 8' Zabel A100 filter with 1/16' filtration is ideal for larger homes, multi-family homes, or light commercial settings where increased flows or higher quality effluent is required. The A100-8 series is sized to handle flow rates from 1200 to 2400 GPD.