Leaching Products: 6
USI Products: 0
Tuf-Tite Risers: 6
Tuf-Tite Lids: 5
Tuf-Tite Adapters: 4
Eljen GSF - Geotextile Sand Filter System: 2
Other Precast Products: 0
Septic System Materials: 5
Mid Seam Tanks: 2
Mid Seam Heavy
Replacing traditional ballast, our new heavy tanks will have a much higher level of structural integrity with the extra weight being distributed evenly throughout the entire tank as opposed to creating weak spots by adding all the extra weight on top.
Plastic Tanks: 2
The Roth MultiTank® is the first tank of its kind. It can be used for water cistern, pump, holding, rainwater, or septic tank. This is possible due to its special construction of an inner layer of FDA approved virgin HDPE, two inside layers of PE for improved stability, plus one outer layer of black and UV-stabilized PE. Not only is it special in terms of its construction, but it also has the best warranty the industry has to offer: lifetime corrosion protection and 5 years of labor insurance coverage (see warranty for more details).
Construction: 4
Septic Accessories: 7
Water Management: 3
Our Products: 2
Products: 2
Advanced Enviro-Septic
Passive onsite wastewater treatment solution for combined treatment and dispersal.
Enviro-Septic
An onsite treatment system that removes up to 98% of wastewater contaminants.
Leaching Chambers: 8
Infiltrator Water Technologies
Infiltrator Water Technologies manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components.
Arc Series
The Arc series’ sturdy, lightweight plastic septic leaching chambers combine maximized infiltrative surface area and storage capacity with an improved structural design to handle virtually any conventional leachfield system challenge without sacrificing performance.
Filters: 4
Orenco Bio-Tube
Orenco® Biotube® FT-Series Residential Effluent Filters remove about two-thirds of suspended solids from effluent, helping extend drainfield life. They are used in new or existing tanks, for residential and light commercial use. Biotube FT-Series Residential Effluent Filters install on the Schedule 40 or Type 3034 outlet pipe in the septic tank. They come with a filter cartridge, PVC housing, and an extendable PVC handle.
Polylok PL122
The PL-122 was the original Polylok filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. Ideal for residential waste flows up to 3,000 gallons per day (GPD).
Polylok PL68
The PL-68 is much more than just an effluent filter. The housing can also be used as an inlet baffle (tee) or, with any 4' outlet septic tank filter. The housing is designed to accept Polylok's snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank. The PL-68 is ideal for residential waste flows up to 800 GPD.
Zabel A100
The 8' Zabel A100 filter with 1/16' filtration is ideal for larger homes, multi-family homes, or light commercial settings where increased flows or higher quality effluent is required. The A100-8 series is sized to handle flow rates from 1200 to 2400 GPD.
Manholes: 3
Manhole General Dimensions
Every manhole is custom built according to jobsite specifications. While there is no 'off the shelf' manhole, this spec sheet will illustrate the general dimensions and parameters on what we can produce.
Downloadable Manhole Request Form
Click here to download, print out and manually fill in a request form that you can either bring in person or scan and send to us.